<A HREF="/products/ppipe.html"><IMG SRC="/images/pressure_pipes.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/pfittings.html"><IMG SRC="/images/pressure_fittings.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/dpipe.html"><IMG SRC="/images/drainage_pipes.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/dfittings.html"><IMG SRC="/images/drainage_fittings.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/ctn.html"><IMG SRC="/images/ctn.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/pe-pipe.html"><IMG SRC="/images/pe-pipe.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/itubing.html"><IMG SRC="/images/itubing.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/mip.html"><IMG SRC="/images/mip.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/wcs.html"><IMG SRC="/images/wcs.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/adhesives.html"><IMG SRC="/images/adhesives.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/adhesives.html"><IMG SRC="/images/adhesives.gif" WIDTH="136" HEIGHT="32" BORDER="0"></A>
<A HREF="/products/adhesives.html"><IMG SRC="/images/adhesives.gif" WIDTH="136" HEIGHT="32" BORDER="0"></A>
<A HREF="/products/adhesives.html"><IMG SRC="/images/adhesives.gif" WIDTH="136" HEIGHT="32" BORDER="0"></A>
 
<A HREF="/profile/profile.html"><IMG SRC="/images/profile.gif" WIDTH=92 HEIGHT=18 BORDER=0></A>   <A HREF="/certifications/certification.html"><IMG SRC="/images/certification.gif" WIDTH=111 HEIGHT=18 BORDER=0></A>   <A HREF="/projects/projects.html"><IMG SRC="/images/projects.gif" WIDTH=108 HEIGHT=18 BORDER=0></A>   <A HREF="/partners/partners.html"><IMG SRC="/images/partners.gif" WIDTH=106 HEIGHT=18 BORDER=0></A>   <A HREF="/contacts/contacts.html"><IMG SRC="/images/contacts.gif" WIDTH=54 HEIGHT=18 BORDER=0></A>


Duct-Liner
718-0200-DDR

Description

Fitco Duct-Liner is a high quality, quick tack adhesive specially formulated for brush application. It provides excellent adhesion and good coverage.

Advantages
  • One component
  • High bond strength in short time
  • Excellent resistance to water and water vapours
  • Easy application
  • Mildew resistance
  • Excellent coverage
  • Quick tack
  • Requires no auxiliary clamp devices
  • Excellent aging properties


Uses

Fitco Duct-Liner is used for bonding fibrous insulation to concrete, wood, gypsum board and rigid construction materials, and for laminating layers of fibrous glass, adhering and sealing laps of pipe, bonding urethane foam to sheet metal and gypsum board, bonding low and high density fibre glass insulation , interior/exterior sheet metal, galvanized metal, stainless steel and aluminium airconditioning and heating ducts, adhering kraft-back foil and foil jacketing to urethane foam.


Directions for use

Surface Preparation.
All surfaces must be clean, dry and free from oil, grease and loose materials.


Application

Using brush or roller, apply adhesive to the metal foil or rigid substrate leaving no bare spot. Apply insulation 0-20 minutes later. Open time depends upon atmospheric conditions. To insure good bond, adhesive should be sufficiently wet.


Caution

Highly flamable material, care must be taken that there are no flames, pilot lights or other sources of ignition. Application must be carried out in a well ventilated area. Avoid prolonged breathing of vapour.


Cleaning

Use Fitco Duct-Liner cleaners for cleaning tools


Packing

5 US gallon pails




Specifications Duct Line

Appearance   Off white/amber/red
Base   Synthetic rubber
Solvent   Aliphatic solvent systems
Consistency   500 ± 200 cps (ASTM 1084)
Solid content   23 ± 3% by weight
Application temperature   -20 to 55 deg. C
Service temperature   -20 to 80 deg. C
Temperature   Room temperature with cross ventilation
Open time   0 - 30 minutes
Cure time   24 hours
Flash point   Petroleum mixture highly flammable
Coverage   Approximately 6m2/litre



Storage & shelf life

When stored in original unopened container has a shelf life of one year.


Adhesives