<A HREF="/products/ppipe.html"><IMG SRC="/images/pressure_pipes.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/pfittings.html"><IMG SRC="/images/pressure_fittings.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/dpipe.html"><IMG SRC="/images/drainage_pipes.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/dfittings.html"><IMG SRC="/images/drainage_fittings.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/ctn.html"><IMG SRC="/images/ctn.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/pe-pipe.html"><IMG SRC="/images/pe-pipe.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/itubing.html"><IMG SRC="/images/itubing.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/mip.html"><IMG SRC="/images/mip.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/wcs.html"><IMG SRC="/images/wcs.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/adhesives.html"><IMG SRC="/images/adhesives.gif" WIDTH=136 HEIGHT=32 BORDER=0></A>
<A HREF="/products/adhesives.html"><IMG SRC="/images/adhesives.gif" WIDTH="136" HEIGHT="32" BORDER="0"></A>
<A HREF="/products/adhesives.html"><IMG SRC="/images/adhesives.gif" WIDTH="136" HEIGHT="32" BORDER="0"></A>
<A HREF="/products/adhesives.html"><IMG SRC="/images/adhesives.gif" WIDTH="136" HEIGHT="32" BORDER="0"></A>
 
<A HREF="/profile/profile.html"><IMG SRC="/images/profile.gif" WIDTH=92 HEIGHT=18 BORDER=0></A>   <A HREF="/certifications/certification.html"><IMG SRC="/images/certification.gif" WIDTH=111 HEIGHT=18 BORDER=0></A>   <A HREF="/projects/projects.html"><IMG SRC="/images/projects.gif" WIDTH=108 HEIGHT=18 BORDER=0></A>   <A HREF="/partners/partners.html"><IMG SRC="/images/partners.gif" WIDTH=106 HEIGHT=18 BORDER=0></A>   <A HREF="/contacts/contacts.html"><IMG SRC="/images/contacts.gif" WIDTH=54 HEIGHT=18 BORDER=0></A>




FIT-FLEX is ideal for exposed and inverted roofs, flat and sloping roofs, new and repaired roofs.


Exposed Flat Roof
 Inverted Flat Roof
Sloping Roof
 Profiled Sheet Roof


Roof Preparation and Directions for use

  • The roof surface must be thoroughly cleaned from dirt, rust, oil, grease and any loose materials.
  • Ensure all surfaces are clean, dry and sound.
  • It is advisable that all sizable cracks and holes be repaired.
  • Proper rain water drain slope is necessary.
  • Roof slope should not be less than 5%.

Surface preparation is of great importance and will influence the degree of adhesion.


Back   Next

Back to adhesives